Exhibitors

Offset Heavy Duty Tapestry Disc Rake; Upon request, it can be manufactured from 18 discs to 36 discs without folding. There is a wide range of models with 22cm disc range and 560mm-610mm diameter notched and flat type disc options. Our variety of models allows the farmer to choose the most suitable machine for his own conditions. It allows us to use our machine at deep working depth in primary tillage. Stubble and plant residues are broken down and the soil is ideally mixed. The disc direction angle, which can reach 25 degrees, provides a good soil tillage and the desired working depth.

No product info found.

Wheeled tandem disc harrow is a practical product with high maneuverability. It creates an effective aeration by breaking the soil with the rotational movement of the wheeled tandem disc harrows and is used in the preparation of the seed bed. It ensures that the plant residues are broken down and mixed with the soil, making them useful for the plant faster, and also effectively mixing the fertilizer thrown into the field. Thanks to its wheel assembly, it creates convenience for the user on the road and in the field. We have models with 24-28-32-36 discs. The notched disc option can also be preferred for more weedy and heavy soil conditions

Due to the plowing of the soil for many years, a layer that is stuck under the base of the incisors and deteriorated in terms of plant root development in terms of its structural properties is formed. If this layer, called the Base Stone, is not broken, a significant decrease in product yield occurs over time. In order to break this layer, a bottom boiler operating at a depth of 40-60 cm is used. It is recommended that the bottom digger, which works deeper than the plow with a depth of 25 cm, should be pulled at 4-10 m intervals every 3-4 years when the soil is dry. If the bottom boiler is used and applied correctly, it provides high efficiency.

Suspended type tandem disc harrow is a practical product with high maneuverability and is preferred in narrow areas. It can be used with small powerful tractors and is simple to adjust. It is used in cultivation and mixing of the soil as a secondary tillage tool in field and garden agriculture. It allows plant residues to be broken down and mixed with the soil, making them useful for the plant faster. It is used to mix the fertilizer thrown into the garden or field. We have models with 20-24-28-32 discs and 460mm-510mm disc diameters. It is aimed to increase the shredding effect by choosing 175mm disc spacing. The notched disc option can also be preferred for more weedy and heavy soil conditions. Disc direction angles can be adjusted from the points where the batteries are attached to the roof. The existing working depth can be increased by placing additional weight (sand bag, etc.) in the weight compartment on the roof.

No product info found.

The independent disc harrow, which is effective and has a wide range of uses in soil cultivation, especially stubble processing and seed bed preparation, reduces product costs with its combined design. It achieves the desired soil processing quality when used at speeds up to 15 km/h depending on soil conditions. High work capacity, low fuel, less chemicals and less fertilizer use. Notched discs with a diameter of 510 mm-560 mm, each bearing an independent bearing, are connected to the chassis with rubber springs. Breaking down the soil and plant residues and mixing them into the soil can be done effectively and with high performance thanks to this structure. It is an ideal machine for minimum soil tillage applications that have gained importance in recent years. It is possible with this machine to effectively break down and mix plant residues without overturning the soil and make it useful to the plant more quickly, thus restoring the biological balance of the soil. You can see these differences in the next production season.

No product info found.

No product info found.

No product info found.