Exhibitors

Offset Heavy Duty Tapestry Disc Rake; Upon request, it can be manufactured from 18 discs to 36 discs without folding. There is a wide range of models with 22cm disc range and 560mm-610mm diameter notched and flat type disc options. Our variety of models allows the farmer to choose the most suitable machine for his own conditions. It allows us to use our machine at deep working depth in primary tillage. Stubble and plant residues are broken down and the soil is ideally mixed. The disc direction angle, which can reach 25 degrees, provides a good soil tillage and the desired working depth

In offset type disc harrow; A more economical and easy-to-use machine is targeted with a lighter chassis and 460mm-510mm disc diameter alternatives in different working widths. It is transported on the road with two wheels. The wheels can also be used to adjust the working depth in the field. Direction angles can be easily adjusted up to a maximum of 22 degrees. We have production in different working widths from 24 discs to 40 discs. Disc type and disc number can be preferred according to tractor power and soil conditions. Disc spacing is 175mm. This; It provides better disintegration of the soil and surface smoothness in seed bed preparation. Optionally, it can be combined with a rear mounted rotary harrow. The rotary harrow ensures that the field clods are broken and leveled before sowing and the seed drill runs smoothly.

Wheeled tandem disc harrow is a practical product with high maneuverability. It creates an effective aeration by breaking the soil with the rotational movement of the wheeled tandem disc harrows and is used in the preparation of the seed bed. It ensures that the plant residues are broken down and mixed with the soil, making them useful for the plant faster, and also effectively mixing the fertilizer thrown into the field. Thanks to its wheel assembly, it creates convenience for the user on the road and in the field. We have models with 24-28-32-36 discs. The notched disc option can also be preferred for more weedy and heavy soil conditions

Due to the plowing of the soil for many years, a layer that is stuck under the base of the incisors and deteriorated in terms of plant root development in terms of its structural properties is formed. If this layer, called the Base Stone, is not broken, a significant decrease in product yield occurs over time. In order to break this layer, a bottom boiler operating at a depth of 40-60 cm is used. It is recommended that the bottom digger, which works deeper than the plow with a depth of 25 cm, should be pulled at 4-10 m intervals every 3-4 years when the soil is dry. If the bottom boiler is used and applied correctly, it provides high efficiency.

Suspended type tandem disc harrow is a practical product with high maneuverability and is preferred in narrow areas. It can be used with small powerful tractors and is simple to adjust. It is used in cultivation and mixing of the soil as a secondary tillage tool in field and garden agriculture. It allows plant residues to be broken down and mixed with the soil, making them useful for the plant faster. It is used to mix the fertilizer thrown into the garden or field. We have models with 20-24-28-32 discs and 460mm-510mm disc diameters. It is aimed to increase the shredding effect by choosing 175mm disc spacing. The notched disc option can also be preferred for more weedy and heavy soil conditions. Disc direction angles can be adjusted from the points where the batteries are attached to the roof. The existing working depth can be increased by placing additional weight (sand bag, etc.) in the weight compartment on the roof.

Hanging type offset disc harrow is a product preferred in horticulture and small parcels with its practical use. It is used by connecting the tractor to a three-point suspension system. Models are available with 16-18-20-22-24-26-28 disc numbers and 510mm-560mm-610mm disc diameters. It is used in secondary soil cultivation, seed bed preparation, cultivation between trees in horticulture, weed control, and mixing fertilizer into the soil. Disc direction angles, front battery and rear battery can be easily adjusted. Front-rear and right-left parallelism adjustments should be made from the tractor suspension arms. It is a simple and practical product that has no settings other than these settings.

No product info found.