PYK series products with high resistance to heavy and variable loads in horizontal, vertical and inclined feed mixing systems for large and small cattle farms offer ideal solutions in TMR systems. They are feed mixed gearboxes with inlet and outlet coaxial or parallel axis or 90° between axis. They are the reducers with mounting connection from the body. The body has a rigid structure. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options can be offered (PAM, W, Gear, Diverter, ). Different output options can be offered (Shaft output, DIN form slider, ). The bodies can be produced as spheroid (GGG 40-50) and gray (GG 20-25). Gears are manufactured from forged and 21NiCrMo2 case-hardened steel. High quality bearings and sealing elements are used. Special requests of customers can be met.

Planetary gearboxes are the solution in drive systems with heavy and variable loads, with their compact and modular structure up to 850000 Nm torque values, with PTO, IEC, splined shaft input options, offering high bonds in small volumes. They are gear units with coaxial input and output or 90° axis angle. There are foot and flange connection options. The body has a rigid and modular structure. Compared to other gearboxes, higher torque values ​​can be met with smaller body dimensions. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options can be offered (IEC, Hydro motor connection, Servo motor connection, ). Different output options can be offered (Shaft output, Conical compression, DIN form slider, ). The bodies are produced as spheroidal (GGG 50-60). Gears are manufactured from forged and 21NiCrMo2 case-hardened steel. High quality bearings and sealing elements are used. Special requests of the customer can be met.

It is a solution as a drive system in various conveyors used in heavy load transfer in cases where the movement needs to be directed 90°. They are helical and bevel gear reducers with 90° between input and output axis. There are body options with foot and body connection. The body has a rigid structure. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options can be offered (Motor coupled, IEC, PAM, W, Servo motor connected, ). Different output options can be offered (Shaft output, Hollow spindle, Conical compression, ). Different connection accessories are available (B5 flange, B14 flange, Torque arm and Platforms, ). The bodies can be produced as spheroid (GGG 40-50) and gray (GG 20-25). Gears are manufactured from forged and 21NiCrMo2 case-hardened steel. High quality bearings and sealing elements are used. Special requests of the customer can be met.

Worm gear drive systems offered for drive systems with low moments and regular loads stand out with their light, high-strength, modern designed bodies as well as their quiet operation. They are worm gear reducers with 90° between input and output axis. With a single body, connection from the foot and flange is available. The body has a rigid structure and is suitable for heat transfer. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options are available (PAM B5, PAM B14, ). Different output options can be offered (Shaft output, Hollow shaft, ). Different connection accessories are available (B5 flange, B14 flange, Torque arm, ). Worm screws are made of 16MnCr5 cementation steel, impellers are made of CuSn12Ni-C bronze. Bodies, ADC-12 aluminum injection up to 105 body size, 110 body and later cast iron (GG 20-25) are used. High quality bearings and sealing elements are used. Special requests of the customer can be met.

M series gearboxes with parallel shaft mounted shaft, produced as hollow shaft or shaft output, are widely preferred in conveyor and executive drive systems. They are helical gear reducers with parallel axis input and output. The body has a rigid structure. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options can be offered (Motor coupled, IEC, PAM, W, Servo motor connected, ). Different output options can be offered (Shaft output, Hollow spindle, Conical compression, ). Different connection accessories can be offered (B5 flange, B14 flange, Rubber wedge, ). The bodies can be produced as spheroid (GGG 40-50) and gray (GG 20-25). Gears are manufactured from forged and 21NiCrMo2 case-hardened steel. High quality bearings and sealing elements are used. Special requests of the customer can be met.

In drive systems where a wide range of bonds and a maximum output torque of 26900 Nm are required, service is offered with the options of foot connection (A) and flange connection (F). They are helical gear reducers with parallel axis input and output. There are body options with foot and flange connection. The body has a rigid structure. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options can be offered (Motor coupled, IEC, PAM, W, Servo motor connected, ). Different flange sizes are available for B5 connections. The bodies can be produced as spheroid (GGG 40-50) and gray (GG 20-25). Gears are manufactured from forged and 21NiCrMo2 case-hardened steel. High quality bearings and sealing elements are used. Special requests of the customer can be met.

Italian Temporiti Brakes, one of the largest brake manufacturers in the world, are in our stocks with all varieties. Electromagnetic Temporary Brakes 24V 100V 180V DC Brakes Cooled Brakes Manual Lever Tempored Brakes K01-K02-K03-K04-K05-K06-K07-K08-K09-K10-K11 Brakes Double Brakes K07D-K08D-K09D-K10D-K11D

Please call for information or to place an order about the high efficiency KEM-P Vibration Motors. KEM-P Micro vibration motors Kem-p Industrial Vibration Motors Kem-p Single Phase Electric Motors Kem-p Variable Frequency Vibration Motors Kem-p Flanged Vibration Motors

Asynchronous motors with wide power range from 0.12 kW to 1000 kW IE2-IE3 Electric motors Aluminum/Cast electric motors

PPC series developed for poultry feeding systems are preferred for their quiet and trouble-free operation and light structure. They are helical geared single-stage reducers with parallel axis input and output. The body has a rigid structure. It can be supplied with shaft output. System strength calculations are made in accordance with ISO, DIN and NIEMANN standards. Gearbox input options are with PAM. The bodies are manufactured from ADC-12 aluminum injection. Different flange sizes are available for B5 connections. Gears are manufactured from forged and 21NiCrMo2 case-hardened steel. High quality bearings and sealing elements are used. Special requests of the customer can be met.